ON7UN Amateur Radio
ON7UN EME
 Mosfet Driver
Inside This Site
Home
Up

    

     

The driver amplifier:

The final amplifier has a TH327 tube. Since we are using the tube bejond the frequency specs ( max 1000 MHz ) and since the tubes we use are "pulls", we expect a power gain between 6 and 8 dB . This means we need quite some drive, to feed this beast.

So, i need between 300 and 500 watt of drive, to come to my desired output power.

Following is the construction of a stand alone driver amplifier, capable of + 500 watt.

Complete homemade chassis

Calibrated output power

with top and bottom cover removed

 

 
 

 

Webdesign Eddy ON7UN